JE Illusions Aftermarket Parts and Accessories for Harley-Davidson Motorcycle

Click here for an enlarged Image

This aggressive ram air box cover with two vents per side was specifically designed to look powerful and mean, take in more air, and add more power. We designed the ram air vent openings to be parallel to the forks of your VRSC and compliment your front-end’s natural lines for a pro-street appearance. The SR fits the VRSC exactly the same as stock require no tools or modifications and takes just minutes to install.

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit and polished aluminum mesh grills for the vents that can also be painted. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions 240 Custom Rear Fender with recessed Tail Light for Harley Davidson Motorcycles and Custom Motorcycle Applications

This airbox cover lives up to its name "The Aggressor". With its aggressive bodylines and twin scoops on top. Two vents provide extra air flow and allow for an extra inch of clearance in the compartment. The AG fits the VRSC exactly the same as stock require no tools or modifications and takes just minutes to install. All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit and polished aluminum mesh grills for the vents that can also be painted. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions 300C Custom Rear Fender With Bodyline and Recessed Tail Light for Harley Davidson Motorcycles

This air box cover allows you to relocate your factory V-Rod gauge pod speedometer and tachometer. This aggressive ram air box cover with two ram vents per side was specifically designed to look powerful and mean, take in more air, and add more power. We designed the ram air vent openings to be parallel to the forks of your VRSC and compliment your front-end’s natural lines for a pro-street appearance. The SGR fits the VRSC exactly the same as stock but requires reversible modification to the air box to provide clearance for the low scoop on top. This air box cover includes a new air filter lid and bolt to facilitate installation. See instructions for more details.

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Our "LR" airbox covers stands for "Large Ram" which you can see in the pictures that there is one large ram air-induction opening on each side. This aggressive ram air box cover side was also specifically designed to look powerful and mean, take in more air, and add more power. We designed the ram air vent openings to be parallel to the forks of your VRSC and compliment your front-end’s natural lines for a pro-street appearance. The SLR fits the VRSC exactly the same as stock require no tools or modifications and takes just minutes to install.

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions The Aggressor Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

This air box cover houses many different styles of Dakota Digital Gauges including the V-Gauge (Gauges sold separately). Now that you have a new digital gauge mounted in your air box cover you can do away with your stock gauge so you have the option of running different handle bars if desired. It is also best to remove your stock gauge for proper fitment. This aggressive ram air box cover with two ram vents per side was specifically designed to look powerful and mean, take in more air, and add more power. We designed the ram air vent openings to be parallel to the forks of your VRSC and compliment your front-end’s natural lines for a pro-street appearance. The VGR fits the VRSC exactly the same as stock but may require the removal of the top half of the air box to provide clearance for the low scoop on top.

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Our SER airbox cover will house your chrome factory CVO gauge console. This aggressive ram air box cover with two ram vents per side was specifically designed to look powerful and mean, take in more air, and add more power. We designed the ram air vent openings to be parallel to the forks of your VRSC and compliment your front-end’s natural lines for a pro-street appearance. The SER fits the VRSC exactly the same as stock requiring only the installation of the CVO console for installation.

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. We also use high quality brackets with aluminum machined pins to obtain a perfect fit. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your Mesh Grill Cover:Select OnePolishedVivid BlackDenim BlackRedMatched Airbox CoverCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions V-Gauge Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Compliment your Harley-Davidson with this aggressive pro-street styled 300C rear fender specifically designed with an undisturbed area rolling back for your paint to shine and a clean body line on the sides. This fender was engineered to give your Harley a clean look with a custom recessed LED taillight strip to replace your OEM taillight. Our 300C rear fender drops down 1 inch lower in the back and is 2 inches shorter than stock leaving just the right amount of tire exposed for that powerful aggressive Pro-Street drag style look. The lower edge of this fender was designed to follow tire radius and the back is also rounded to match the tire roll. This fender will accommodate suspension lowering kits of any kind. This fender will fit all 2007-2010 VRSC models except the 2007-2008 VRSCD Night-Rod (the 240F fits this model). It can accommodate tire widths up to 300mm. Your OEM Harley seat will fit and flow over this fender perfectly. If you are looking to run your sissy bar and base plate, this fender will accommodate but the aggressive curve will leave a small gap at the rear tip of the base plate.

 

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Large Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

This fender is designed to complete the aggressor series or be added alone. With its center spine and aggressive cut aways it gives your VROD that sinister look. This fender is compatible with all VROD models and mounts with existing stock mounting hardware.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Large Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Designed to accompany the Aggressor airbox cover, but can create a wicked look all by itself as well. With its aggressive lines and raised spine it creates a sinister style. The lower edge of this fender was designed to follow tire radius and the back is cut away to give that sinister look. This fender was engineered to give your Harley a clean look with a custom recessed LED taillight strip to replace your OEM taillight. This fender will accommodate suspension lowering kits of any kind. This fender will fit the 2006-2008 VRSCD Night-Rod and all 2002-2006 VRSC models except the VRSCR Street-Rod (Our 300 line fenders fit newer VRSC models). It can accommodate tire widths up to 280mm but is ideal for 240mm and smaller tires. The installation of this fender requires full removal of inner fender. Your OEM Harley seat will fit and flow over this fender perfectly. If you are looking to run your sissy bar and base plate, this fender will accommodate but the aggressive curve with leave a small gap at the rear tip of the base plate.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Large Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Compliment your Harley-Davidson with this aggressive pro-street styled 240F rear fender specifically designed with an undisturbed area rolling back for your paint to shine. This fender was engineered to give your Harley a clean look with a custom recessed LED taillight strip to replace your OEM taillight. Our 240F rear fender drops down 2 inches lower in the back and is 2 inches shorter than stock leaving just the right amount of tire exposed for that powerful aggressive Pro-Street drag style look. The lower edge of this fender was designed to follow tire radius and the back is also rounded to match the tire roll. This fender will accommodate suspension lowering kits of any kind. This fender will fit the 2006-2008 VRSCD Night-Rod and all 2002-2006 VRSC models except the VRSCR Street-Rod (Our 300 line fenders fit newer VRSC models). It can accommodate tire widths up to 280mm but is ideal for 240mm and smaller tires. Your OEM Harley seat will fit and flow over this fender perfectly. If you are looking to run your sissy bar and base plate, this fender will accommodate but the aggressive curve with leave a small gap at the rear tip of the base plate.

 

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions The Aggressor Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

Compliment your Harley-Davidson with this aggressive pro-street styled 300CX rear fender specifically designed with an undisturbed area rolling back for your paint to shine. This fender was engineered to give your Harley a clean look with a custom recessed LED taillight strip to replace your OEM taillight. Our 300CX rear fender drops down 3 inches lower in the back and is 1 inch shorter than stock leaving just the right amount of tire exposed for that powerful aggressive Pro-Street drag style look. The lower edge of this fender was designed to follow tire radius and the back is also rounded to match the tire roll. This fender will accommodate suspension lowering kits of any kind. This fender will fit all 2007-2010 VRSC models except the 2007-2008 VRSCD Night-Rod (the 240F fits this model). It can accommodate tire widths up to 300mm. Your OEM Harley seat will fit and flow over this fender perfectly. If you are looking to run your sissy bar and base plate, this fender will accommodate but the aggressive curve will leave a small gap at the rear tip of the base plate.

 

All of our parts are made of high quality, hand laid fiberglass. We start with a high quality vinyl ester tooling gel coat to obtain maximum surface strength and durability. A surface veil is then laid into the mold and allowed to cure. This eliminates ALL chances of any bridging and blisters and fiber printing through your paint work. Our parts are built using a vinyl ester resin for optimum strength and durability. The resin is resistant to gasoline, acids, and has a higher heat distortion temperature. Each one of our parts is superior quality and 100% inspected thoroughly.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions Standard Ram Airbox Cover for Harley Davidson V-Rod Motorcycles available in many different Finishes

See Fender Fitted (picture 1)

Cutting Edge Illusions - Cutting Edge Illusions 240 SF Rear Fender for 2007-2010 VRSC models available with many different finishes.

The 240SF is our tightest fender for the 2007-2010 VRSC models. This fender is 2" narrower, 1 1/2" shorter, and 2 1/4" lower than the stock fender without the license plate. It gives the 240mm or 250mm tire a bigger look without the ture and swing arm upgrade.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions 300C Custom Rear Fender With Bodyline and Recessed Tail Light for Harley Davidson Motorcycles

Cutting Edge Illusions - Cutting Edge Illusions Agressor Rear Fender for 2007-2010 VRSC models except the VRSCR Street-Rod available in many different finishes

Designed to accompany the Aggressor airbox cover, but can create a wicked look all by itself as well. With its aggressive lines and raised spine it creates a sinister style. The lower edge of this fender was designed to follow tire radius and the back is cut away to give that sinister look. This fender was engineered to give your Harley a clean look with a custom recessed LED taillight strip to replace your OEM taillight. This fender will accommodate suspension lowering kits of any kind. This fender will fit the 2007-2010 VRSC models except the VRSCR Street-Rod (Our 300 line fenders fit newer VRSC models). It can accommodate tire widths up to 280mm but is ideal for 240mm and smaller tires. The installation of this fender requires full removal of inner fender. Your OEM Harley seat will fit and flow over this fender perfectly. If you are looking to run your sissy bar and base plate, this fender will accommodate but the aggressive curve with leave a small gap at the rear tip of the base plate.

Select your choice from the drop down list below and click 'Check Price'.

Select Your Paint Color:Select OneNo PaintDenim Black with Vivid StripesVivid Black with Denim StripesDenim BlackVivid BlackVivid Black with Orange StripesVivid Black with Pewter StripesSolid ColorCustom

Select Your LED Light Kit:Select OneAmber Turns Clear TubeAmber Turns Smoke TubeRed Turns Red TubeDual Color Turns Clear TubeDual Color Turns Smoke Tube

 

See Also:

• Cutting Edge Illusions - Cutting Edge Illusions 300 CX Custom Rear Fender with Recessed Tail Light for Harley Davidson Motorcycles and Custom Applications